Products

L, U, C, Z, Sigma and Omega cold formed steel profiles from galvanized steel S350GD+Z275MA with the length of up to 13.5 meters. Metal thickness varies from 0.5 to 3.2 mm.

TU, TZ, TC, TL shaped certified profiles from galvanised steel S350GD+Z275MA with the length of up to 12.3 meters. Metal thickness varies from 0.5 to 3.2 mm, thermal perforation from 3 – 15 rows.

HAT perforated profiles. Metal thickness varies from 0.5 to 2.5 mm.

Aluminum and galvanized steel S350GD+Z275MA material up to 3.0 mm thickness.

Trapezoidal sheets from profile A20 to A60, which is the solution for partition walls and roofs. Metal thickness varies from 0.4 to 0.8 mm.

Sinus type sheets from profile SIN18 to SIN42, used in wall and roof solutions for architects and designers. Metal thickness varies from 0.4 to 0.8 mm.

Trapezoidal sheets DA60, which can take heavy loads without deformation, therefore ideal for collaborative floors. Metal thickness varies from 0.6 to 1.2 mm.

Trapezoidal sheets from 85 to 200, and used as a support for flat roofs and decks with large openings between bearings from 3 m to 7 m, to complete a low slope roof (angle to 5°). Metal thickness varies from 0.75 mm to 1.25 mm.

For walls and roofs from 30 mm up to 200 mm thickness. Length of panels from 2500 mm up to 13500 mm. RAL color surface. Width of panel 1000 / 1100 / 1180 mm.

For walls and roofs from 60 mm up to 200 mm thickness. Length of panels from 2500 mm up to 13500 mm. RAL color surface. Width of panel 1100 mm.

Made of top quality certified semi-processed products, subsequently hot-dip galvanized or pre-painted. Metallic guardrail systems are tested in the AISICO (Associazione Italiana per la Sicurezza dela Circolazione – Italian Association for Circulation Safety) and CSI (Centro Sicurezza SpA – Safety Center SpA) authorized laboratories, in conformity with EN 1317 standard requirements.

Designed, tested in authorized laboratories and certified road metallic guardrail systems according to SR EN 1317 (Road Safety Devices) requirements. Results of crash tests: -lightweight vehicle: impact absorption; -heavy vehicles: containment and redirection of vehicle. CE marking conformity.

Acoustic insulation: >23 dB; – acoustic absorption: 12 dB; – strength: 235 kg/sqm; – very high resistance to climate factors (wind / snow); – RAL colors; – combining panels with polycarbonate; – assembly without screws; – simple replacement of damaged panels; – fire resistant panels. Barriers are made of profiled sheet steel, galvanized and pre-painted with 1 mm thickness, standard sizes of 2975 x 500 x 110 mm, perforated of 35% of the area.